library/std/src/backtrace.rs - toolchain/rustc - Git at Google

 //! Support for capturing a stack backtrace of an OS thread
 //!
 //! This module contains the support necessary to capture a stack backtrace of a
 //! running OS thread from the OS thread itself. The `Backtrace` type supports
 //! capturing a stack trace via the `Backtrace::capture` and
 //! `Backtrace::force_capture` functions.
 //!
 //! A backtrace is typically quite handy to attach to errors (e.g. types
 //! implementing `std::error::Error`) to get a causal chain of where an error
 //! was generated.
 //!
 //! ## Accuracy
 //!
 //! Backtraces are attempted to be as accurate as possible, but no guarantees
 //! are provided about the exact accuracy of a backtrace. Instruction pointers,
 //! symbol names, filenames, line numbers, etc, may all be incorrect when
 //! reported. Accuracy is attempted on a best-effort basis, however, any bug
 //! reports are always welcome to indicate areas of improvement!
 //!
 //! For most platforms a backtrace with a filename/line number requires that
 //! programs be compiled with debug information. Without debug information
 //! filenames/line numbers will not be reported.
 //!
 //! ## Platform support
 //!
 //! Not all platforms that std compiles for support capturing backtraces. Some
 //! platforms simply do nothing when capturing a backtrace. To check whether the
 //! platform supports capturing backtraces you can consult the `BacktraceStatus`
 //! enum as a result of `Backtrace::status`.
 //!
 //! Like above with accuracy platform support is done on a best effort basis.
 //! Sometimes libraries might not be available at runtime or something may go
 //! wrong which would cause a backtrace to not be captured. Please feel free to
 //! report issues with platforms where a backtrace cannot be captured though!
 //!
 //! ## Environment Variables
 //!
 //! The `Backtrace::capture` function might not actually capture a backtrace by
 //! default. Its behavior is governed by two environment variables:
 //!
 //! * `RUST_LIB_BACKTRACE` - if this is set to `0` then `Backtrace::capture`
 //!   will never capture a backtrace. Any other value set will enable
 //!   `Backtrace::capture`.
 //!
 //! * `RUST_BACKTRACE` - if `RUST_LIB_BACKTRACE` is not set, then this variable
 //!   is consulted with the same rules of `RUST_LIB_BACKTRACE`.
 //!
 //! * If neither of the above env vars are set, then `Backtrace::capture` will
 //!   be disabled.
 //!
 //! Capturing a backtrace can be a quite expensive runtime operation, so the
 //! environment variables allow either forcibly disabling this runtime
 //! performance hit or allow selectively enabling it in some programs.
 //!
 //! Note that the `Backtrace::force_capture` function can be used to ignore
 //! these environment variables. Also note that the state of environment
 //! variables is cached once the first backtrace is created, so altering
 //! `RUST_LIB_BACKTRACE` or `RUST_BACKTRACE` at runtime might not actually change
 //! how backtraces are captured.

 #![stable(feature = "backtrace", since = "1.65.0")]

 #[cfg(test)]
 mod tests;

 // NB: A note on resolution of a backtrace:
 //
 // Backtraces primarily happen in two steps, one is where we actually capture
 // the stack backtrace, giving us a list of instruction pointers corresponding
 // to stack frames. Next we take these instruction pointers and, one-by-one,
 // turn them into a human readable name (like `main`).
 //
 // The first phase can be somewhat expensive (walking the stack), especially
 // on MSVC where debug information is consulted to return inline frames each as
 // their own frame. The second phase, however, is almost always extremely
 // expensive (on the order of milliseconds sometimes) when it's consulting debug
 // information.
 //
 // We attempt to amortize this cost as much as possible by delaying resolution
 // of an address to a human readable name for as long as possible. When
 // `Backtrace::create` is called to capture a backtrace it doesn't actually
 // perform any symbol resolution, but rather we lazily resolve symbols only just
 // before they're needed for printing. This way we can make capturing a
 // backtrace and throwing it away much cheaper, but actually printing a
 // backtrace is still basically the same cost.
 //
 // This strategy comes at the cost of some synchronization required inside of a
 // `Backtrace`, but that's a relatively small price to pay relative to capturing
 // a backtrace or actually symbolizing it.

 use crate::backtrace_rs::{self, BytesOrWideString};
 use crate::ffi::c_void;
 use crate::panic::UnwindSafe;
 use crate::sync::LazyLock;
 use crate::sync::atomic::AtomicU8;
 use crate::sync::atomic::Ordering::Relaxed;
 use crate::sys::backtrace::{lock, output_filename, set_image_base};
 use crate::{env, fmt};

 /// A captured OS thread stack backtrace.
 ///
 /// This type represents a stack backtrace for an OS thread captured at a
 /// previous point in time. In some instances the `Backtrace` type may
 /// internally be empty due to configuration. For more information see
 /// `Backtrace::capture`.
 #[stable(feature = "backtrace", since = "1.65.0")]
 #[must_use]
 pub struct Backtrace {
     inner: Inner,
 }

 /// The current status of a backtrace, indicating whether it was captured or
 /// whether it is empty for some other reason.
 #[stable(feature = "backtrace", since = "1.65.0")]
 #[non_exhaustive]
 #[derive(Debug, PartialEq, Eq)]
 pub enum BacktraceStatus {
     /// Capturing a backtrace is not supported, likely because it's not
     /// implemented for the current platform.
     #[stable(feature = "backtrace", since = "1.65.0")]
     Unsupported,
     /// Capturing a backtrace has been disabled through either the
     /// `RUST_LIB_BACKTRACE` or `RUST_BACKTRACE` environment variables.
     #[stable(feature = "backtrace", since = "1.65.0")]
     Disabled,
     /// A backtrace has been captured and the `Backtrace` should print
     /// reasonable information when rendered.
     #[stable(feature = "backtrace", since = "1.65.0")]
     Captured,
 }

 enum Inner {
     Unsupported,
     Disabled,
     Captured(LazyLock<Capture, LazyResolve>),
 }

 struct Capture {
     actual_start: usize,
     frames: Vec<BacktraceFrame>,
 }

 fn _assert_send_sync() {
     fn _assert<T: Send + Sync>() {}
     _assert::<Backtrace>();
 }

 /// A single frame of a backtrace.
 #[unstable(feature = "backtrace_frames", issue = "79676")]
 pub struct BacktraceFrame {
     frame: RawFrame,
     symbols: Vec<BacktraceSymbol>,
 }

 #[derive(Debug)]
 enum RawFrame {
     Actual(backtrace_rs::Frame),
     #[cfg(test)]
     Fake,
 }

 struct BacktraceSymbol {
     name: Option<Vec<u8>>,
     filename: Option<BytesOrWide>,
     lineno: Option<u32>,
     colno: Option<u32>,
 }

 enum BytesOrWide {
     Bytes(Vec<u8>),
     Wide(Vec<u16>),
 }

 #[stable(feature = "backtrace", since = "1.65.0")]
 impl fmt::Debug for Backtrace {
     fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
         let capture = match &self.inner {
             Inner::Unsupported => return fmt.write_str("<unsupported>"),
             Inner::Disabled => return fmt.write_str("<disabled>"),
             Inner::Captured(c) => &**c,
         };

         let frames = &capture.frames[capture.actual_start..];

         write!(fmt, "Backtrace ")?;

         let mut dbg = fmt.debug_list();

         for frame in frames {
             if frame.frame.ip().is_null() {
                 continue;
             }

             dbg.entries(&frame.symbols);
         }

         dbg.finish()
     }
 }

 #[unstable(feature = "backtrace_frames", issue = "79676")]
 impl fmt::Debug for BacktraceFrame {
     fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
         let mut dbg = fmt.debug_list();
         dbg.entries(&self.symbols);
         dbg.finish()
     }
 }

 impl fmt::Debug for BacktraceSymbol {
     fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
         // FIXME: improve formatting: https://github.com/rust-lang/rust/issues/65280
         // FIXME: Also, include column numbers into the debug format as Display already has them.
         // Until there are stable per-frame accessors, the format shouldn't be changed:
         // https://github.com/rust-lang/rust/issues/65280#issuecomment-638966585
         write!(fmt, "{{ ")?;

         if let Some(fn_name) = self.name.as_ref().map(|b| backtrace_rs::SymbolName::new(b)) {
             write!(fmt, "fn: \"{:#}\"", fn_name)?;
         } else {
             write!(fmt, "fn: <unknown>")?;
         }

         if let Some(fname) = self.filename.as_ref() {
             write!(fmt, ", file: \"{:?}\"", fname)?;
         }

         if let Some(line) = self.lineno {
             write!(fmt, ", line: {:?}", line)?;
         }

         write!(fmt, " }}")
     }
 }

 impl fmt::Debug for BytesOrWide {
     fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
         output_filename(
             fmt,
             match self {
                 BytesOrWide::Bytes(w) => BytesOrWideString::Bytes(w),
                 BytesOrWide::Wide(w) => BytesOrWideString::Wide(w),
             },
             backtrace_rs::PrintFmt::Short,
             crate::env::current_dir().as_ref().ok(),
         )
     }
 }

 impl Backtrace {
     /// Returns whether backtrace captures are enabled through environment
     /// variables.
     fn enabled() -> bool {
         // Cache the result of reading the environment variables to make
         // backtrace captures speedy, because otherwise reading environment
         // variables every time can be somewhat slow.
         static ENABLED: AtomicU8 = AtomicU8::new(0);
         match ENABLED.load(Relaxed) {
             0 => {}
             1 => return false,
             _ => return true,
         }
         let enabled = match env::var("RUST_LIB_BACKTRACE") {
             Ok(s) => s != "0",
             Err(_) => match env::var("RUST_BACKTRACE") {
                 Ok(s) => s != "0",
                 Err(_) => false,
             },
         };
         ENABLED.store(enabled as u8 + 1, Relaxed);
         enabled
     }

     /// Captures a stack backtrace of the current thread.
     ///
     /// This function will capture a stack backtrace of the current OS thread of
     /// execution, returning a `Backtrace` type which can be later used to print
     /// the entire stack trace or render it to a string.
     ///
     /// This function will be a noop if the `RUST_BACKTRACE` or
     /// `RUST_LIB_BACKTRACE` backtrace variables are both not set. If either
     /// environment variable is set and enabled then this function will actually
     /// capture a backtrace. Capturing a backtrace can be both memory intensive
     /// and slow, so these environment variables allow liberally using
     /// `Backtrace::capture` and only incurring a slowdown when the environment
     /// variables are set.
     ///
     /// To forcibly capture a backtrace regardless of environment variables, use
     /// the `Backtrace::force_capture` function.
     #[stable(feature = "backtrace", since = "1.65.0")]
     #[inline(never)] // want to make sure there's a frame here to remove
     pub fn capture() -> Backtrace {
         if !Backtrace::enabled() {
             return Backtrace { inner: Inner::Disabled };
         }
         Backtrace::create(Backtrace::capture as usize)
     }

     /// Forcibly captures a full backtrace, regardless of environment variable
     /// configuration.
     ///
     /// This function behaves the same as `capture` except that it ignores the
     /// values of the `RUST_BACKTRACE` and `RUST_LIB_BACKTRACE` environment
     /// variables, always capturing a backtrace.
     ///
     /// Note that capturing a backtrace can be an expensive operation on some
     /// platforms, so this should be used with caution in performance-sensitive
     /// parts of code.
     #[stable(feature = "backtrace", since = "1.65.0")]
     #[inline(never)] // want to make sure there's a frame here to remove
     pub fn force_capture() -> Backtrace {
         Backtrace::create(Backtrace::force_capture as usize)
     }

     /// Forcibly captures a disabled backtrace, regardless of environment
     /// variable configuration.
     #[stable(feature = "backtrace", since = "1.65.0")]
     #[rustc_const_stable(feature = "backtrace", since = "1.65.0")]
     pub const fn disabled() -> Backtrace {
         Backtrace { inner: Inner::Disabled }
     }

     // Capture a backtrace which start just before the function addressed by
     // `ip`
     fn create(ip: usize) -> Backtrace {
         let _lock = lock();
         let mut frames = Vec::new();
         let mut actual_start = None;
         set_image_base();
         unsafe {
             backtrace_rs::trace_unsynchronized(|frame| {
                 frames.push(BacktraceFrame {
                     frame: RawFrame::Actual(frame.clone()),
                     symbols: Vec::new(),
                 });
                 if frame.symbol_address().addr() == ip && actual_start.is_none() {
                     actual_start = Some(frames.len());
                 }
                 true
             });
         }

         // If no frames came out assume that this is an unsupported platform
         // since `backtrace` doesn't provide a way of learning this right now,
         // and this should be a good enough approximation.
         let inner = if frames.is_empty() {
             Inner::Unsupported
         } else {
             Inner::Captured(LazyLock::new(lazy_resolve(Capture {
                 actual_start: actual_start.unwrap_or(0),
                 frames,
             })))
         };

         Backtrace { inner }
     }

     /// Returns the status of this backtrace, indicating whether this backtrace
     /// request was unsupported, disabled, or a stack trace was actually
     /// captured.
     #[stable(feature = "backtrace", since = "1.65.0")]
     #[must_use]
     pub fn status(&self) -> BacktraceStatus {
         match self.inner {
             Inner::Unsupported => BacktraceStatus::Unsupported,
             Inner::Disabled => BacktraceStatus::Disabled,
             Inner::Captured(_) => BacktraceStatus::Captured,
         }
     }
 }

 impl<'a> Backtrace {
     /// Returns an iterator over the backtrace frames.
     #[must_use]
     #[unstable(feature = "backtrace_frames", issue = "79676")]
     pub fn frames(&'a self) -> &'a [BacktraceFrame] {
         if let Inner::Captured(c) = &self.inner { &c.frames } else { &[] }
     }
 }

 #[stable(feature = "backtrace", since = "1.65.0")]
 impl fmt::Display for Backtrace {
     fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
         let capture = match &self.inner {
             Inner::Unsupported => return fmt.write_str("unsupported backtrace"),
             Inner::Disabled => return fmt.write_str("disabled backtrace"),
             Inner::Captured(c) => &**c,
         };

         let full = fmt.alternate();
         let (frames, style) = if full {
             (&capture.frames[..], backtrace_rs::PrintFmt::Full)
         } else {
             (&capture.frames[capture.actual_start..], backtrace_rs::PrintFmt::Short)
         };

         // When printing paths we try to strip the cwd if it exists, otherwise
         // we just print the path as-is. Note that we also only do this for the
         // short format, because if it's full we presumably want to print
         // everything.
         let cwd = crate::env::current_dir();
         let mut print_path = move |fmt: &mut fmt::Formatter<'_>, path: BytesOrWideString<'_>| {
             output_filename(fmt, path, style, cwd.as_ref().ok())
         };

         let mut f = backtrace_rs::BacktraceFmt::new(fmt, style, &mut print_path);
         f.add_context()?;
         for frame in frames {
             if frame.symbols.is_empty() {
                 f.frame().print_raw(frame.frame.ip(), None, None, None)?;
             } else {
                 for symbol in frame.symbols.iter() {
                     f.frame().print_raw_with_column(
                         frame.frame.ip(),
                         symbol.name.as_ref().map(|b| backtrace_rs::SymbolName::new(b)),
                         symbol.filename.as_ref().map(|b| match b {
                             BytesOrWide::Bytes(w) => BytesOrWideString::Bytes(w),
                             BytesOrWide::Wide(w) => BytesOrWideString::Wide(w),
                         }),
                         symbol.lineno,
                         symbol.colno,
                     )?;
                 }
             }
         }
         f.finish()?;
         Ok(())
     }
 }

 mod helper {
     use super::*;
     pub(super) type LazyResolve = impl (FnOnce() -> Capture) + Send + Sync + UnwindSafe;

     pub(super) fn lazy_resolve(mut capture: Capture) -> LazyResolve {
         move || {
             // Use the global backtrace lock to synchronize this as it's a
             // requirement of the `backtrace` crate, and then actually resolve
             // everything.
             let _lock = lock();
             for frame in capture.frames.iter_mut() {
                 let symbols = &mut frame.symbols;
                 let frame = match &frame.frame {
                     RawFrame::Actual(frame) => frame,
                     #[cfg(test)]
                     RawFrame::Fake => unimplemented!(),
                 };
                 unsafe {
                     backtrace_rs::resolve_frame_unsynchronized(frame, |symbol| {
                         symbols.push(BacktraceSymbol {
                             name: symbol.name().map(|m| m.as_bytes().to_vec()),
                             filename: symbol.filename_raw().map(|b| match b {
                                 BytesOrWideString::Bytes(b) => BytesOrWide::Bytes(b.to_owned()),
                                 BytesOrWideString::Wide(b) => BytesOrWide::Wide(b.to_owned()),
                             }),
                             lineno: symbol.lineno(),
                             colno: symbol.colno(),
                         });
                     });
                 }
             }

             capture
         }
     }
 }
 use helper::*;

 impl RawFrame {
     fn ip(&self) -> *mut c_void {
         match self {
             RawFrame::Actual(frame) => frame.ip(),
             #[cfg(test)]
             RawFrame::Fake => crate::ptr::without_provenance_mut(1),
         }
     }
 }
	//! Support for capturing a stack backtrace of an OS thread
	//!
	//! This module contains the support necessary to capture a stack backtrace of a
	//! running OS thread from the OS thread itself. The `Backtrace` type supports
	//! capturing a stack trace via the `Backtrace::capture` and
	//! `Backtrace::force_capture` functions.
	//!
	//! A backtrace is typically quite handy to attach to errors (e.g. types
	//! implementing `std::error::Error`) to get a causal chain of where an error
	//! was generated.
	//!
	//! ## Accuracy
	//!
	//! Backtraces are attempted to be as accurate as possible, but no guarantees
	//! are provided about the exact accuracy of a backtrace. Instruction pointers,
	//! symbol names, filenames, line numbers, etc, may all be incorrect when
	//! reported. Accuracy is attempted on a best-effort basis, however, any bug
	//! reports are always welcome to indicate areas of improvement!
	//!
	//! For most platforms a backtrace with a filename/line number requires that
	//! programs be compiled with debug information. Without debug information
	//! filenames/line numbers will not be reported.
	//!
	//! ## Platform support
	//!
	//! Not all platforms that std compiles for support capturing backtraces. Some
	//! platforms simply do nothing when capturing a backtrace. To check whether the
	//! platform supports capturing backtraces you can consult the `BacktraceStatus`
	//! enum as a result of `Backtrace::status`.
	//!
	//! Like above with accuracy platform support is done on a best effort basis.
	//! Sometimes libraries might not be available at runtime or something may go
	//! wrong which would cause a backtrace to not be captured. Please feel free to
	//! report issues with platforms where a backtrace cannot be captured though!
	//!
	//! ## Environment Variables
	//!
	//! The `Backtrace::capture` function might not actually capture a backtrace by
	//! default. Its behavior is governed by two environment variables:
	//!
	//! * `RUST_LIB_BACKTRACE` - if this is set to `0` then `Backtrace::capture`
	//! will never capture a backtrace. Any other value set will enable
	//! `Backtrace::capture`.
	//!
	//! * `RUST_BACKTRACE` - if `RUST_LIB_BACKTRACE` is not set, then this variable
	//! is consulted with the same rules of `RUST_LIB_BACKTRACE`.
	//!
	//! * If neither of the above env vars are set, then `Backtrace::capture` will
	//! be disabled.
	//!
	//! Capturing a backtrace can be a quite expensive runtime operation, so the
	//! environment variables allow either forcibly disabling this runtime
	//! performance hit or allow selectively enabling it in some programs.
	//!
	//! Note that the `Backtrace::force_capture` function can be used to ignore
	//! these environment variables. Also note that the state of environment
	//! variables is cached once the first backtrace is created, so altering
	//! `RUST_LIB_BACKTRACE` or `RUST_BACKTRACE` at runtime might not actually change
	//! how backtraces are captured.

	#![stable(feature = "backtrace", since = "1.65.0")]

	#[cfg(test)]
	mod tests;

	// NB: A note on resolution of a backtrace:
	//
	// Backtraces primarily happen in two steps, one is where we actually capture
	// the stack backtrace, giving us a list of instruction pointers corresponding
	// to stack frames. Next we take these instruction pointers and, one-by-one,
	// turn them into a human readable name (like `main`).
	//
	// The first phase can be somewhat expensive (walking the stack), especially
	// on MSVC where debug information is consulted to return inline frames each as
	// their own frame. The second phase, however, is almost always extremely
	// expensive (on the order of milliseconds sometimes) when it's consulting debug
	// information.
	//
	// We attempt to amortize this cost as much as possible by delaying resolution
	// of an address to a human readable name for as long as possible. When
	// `Backtrace::create` is called to capture a backtrace it doesn't actually
	// perform any symbol resolution, but rather we lazily resolve symbols only just
	// before they're needed for printing. This way we can make capturing a
	// backtrace and throwing it away much cheaper, but actually printing a
	// backtrace is still basically the same cost.
	//
	// This strategy comes at the cost of some synchronization required inside of a
	// `Backtrace`, but that's a relatively small price to pay relative to capturing
	// a backtrace or actually symbolizing it.

	use crate::backtrace_rs::{self, BytesOrWideString};
	use crate::ffi::c_void;
	use crate::panic::UnwindSafe;
	use crate::sync::LazyLock;
	use crate::sync::atomic::AtomicU8;
	use crate::sync::atomic::Ordering::Relaxed;
	use crate::sys::backtrace::{lock, output_filename, set_image_base};
	use crate::{env, fmt};

	/// A captured OS thread stack backtrace.
	///
	/// This type represents a stack backtrace for an OS thread captured at a
	/// previous point in time. In some instances the `Backtrace` type may
	/// internally be empty due to configuration. For more information see
	/// `Backtrace::capture`.
	#[stable(feature = "backtrace", since = "1.65.0")]
	#[must_use]
	pub struct Backtrace {
	inner: Inner,
	}

	/// The current status of a backtrace, indicating whether it was captured or
	/// whether it is empty for some other reason.
	#[stable(feature = "backtrace", since = "1.65.0")]
	#[non_exhaustive]
	#[derive(Debug, PartialEq, Eq)]
	pub enum BacktraceStatus {
	/// Capturing a backtrace is not supported, likely because it's not
	/// implemented for the current platform.
	#[stable(feature = "backtrace", since = "1.65.0")]
	Unsupported,
	/// Capturing a backtrace has been disabled through either the
	/// `RUST_LIB_BACKTRACE` or `RUST_BACKTRACE` environment variables.
	#[stable(feature = "backtrace", since = "1.65.0")]
	Disabled,
	/// A backtrace has been captured and the `Backtrace` should print
	/// reasonable information when rendered.
	#[stable(feature = "backtrace", since = "1.65.0")]
	Captured,
	}

	enum Inner {
	Unsupported,
	Disabled,
	Captured(LazyLock<Capture, LazyResolve>),
	}

	struct Capture {
	actual_start: usize,
	frames: Vec<BacktraceFrame>,
	}

	fn _assert_send_sync() {
	fn _assert<T: Send + Sync>() {}
	_assert::<Backtrace>();
	}

	/// A single frame of a backtrace.
	#[unstable(feature = "backtrace_frames", issue = "79676")]
	pub struct BacktraceFrame {
	frame: RawFrame,
	symbols: Vec<BacktraceSymbol>,
	}

	#[derive(Debug)]
	enum RawFrame {
	Actual(backtrace_rs::Frame),
	#[cfg(test)]
	Fake,
	}

	struct BacktraceSymbol {
	name: Option<Vec<u8>>,
	filename: Option<BytesOrWide>,
	lineno: Option<u32>,
	colno: Option<u32>,
	}

	enum BytesOrWide {
	Bytes(Vec<u8>),
	Wide(Vec<u16>),
	}

	#[stable(feature = "backtrace", since = "1.65.0")]
	impl fmt::Debug for Backtrace {
	fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
	let capture = match &self.inner {
	Inner::Unsupported => return fmt.write_str("<unsupported>"),
	Inner::Disabled => return fmt.write_str("<disabled>"),
	Inner::Captured(c) => &**c,
	};

	let frames = &capture.frames[capture.actual_start..];

	write!(fmt, "Backtrace ")?;

	let mut dbg = fmt.debug_list();

	for frame in frames {
	if frame.frame.ip().is_null() {
	continue;
	}

	dbg.entries(&frame.symbols);
	}

	dbg.finish()
	}
	}

	#[unstable(feature = "backtrace_frames", issue = "79676")]
	impl fmt::Debug for BacktraceFrame {
	fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
	let mut dbg = fmt.debug_list();
	dbg.entries(&self.symbols);
	dbg.finish()
	}
	}

	impl fmt::Debug for BacktraceSymbol {
	fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
	// FIXME: improve formatting: https://github.com/rust-lang/rust/issues/65280
	// FIXME: Also, include column numbers into the debug format as Display already has them.
	// Until there are stable per-frame accessors, the format shouldn't be changed:
	// https://github.com/rust-lang/rust/issues/65280#issuecomment-638966585
	write!(fmt, "{{ ")?;

	if let Some(fn_name) = self.name.as_ref().map(\|b\| backtrace_rs::SymbolName::new(b)) {
	write!(fmt, "fn: \"{:#}\"", fn_name)?;
	} else {
	write!(fmt, "fn: <unknown>")?;
	}

	if let Some(fname) = self.filename.as_ref() {
	write!(fmt, ", file: \"{:?}\"", fname)?;
	}

	if let Some(line) = self.lineno {
	write!(fmt, ", line: {:?}", line)?;
	}

	write!(fmt, " }}")
	}
	}

	impl fmt::Debug for BytesOrWide {
	fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
	output_filename(
	fmt,
	match self {
	BytesOrWide::Bytes(w) => BytesOrWideString::Bytes(w),
	BytesOrWide::Wide(w) => BytesOrWideString::Wide(w),
	},
	backtrace_rs::PrintFmt::Short,
	crate::env::current_dir().as_ref().ok(),
	)
	}
	}

	impl Backtrace {
	/// Returns whether backtrace captures are enabled through environment
	/// variables.
	fn enabled() -> bool {
	// Cache the result of reading the environment variables to make
	// backtrace captures speedy, because otherwise reading environment
	// variables every time can be somewhat slow.
	static ENABLED: AtomicU8 = AtomicU8::new(0);
	match ENABLED.load(Relaxed) {
	0 => {}
	1 => return false,
	_ => return true,
	}
	let enabled = match env::var("RUST_LIB_BACKTRACE") {
	Ok(s) => s != "0",
	Err(_) => match env::var("RUST_BACKTRACE") {
	Ok(s) => s != "0",
	Err(_) => false,
	},
	};
	ENABLED.store(enabled as u8 + 1, Relaxed);
	enabled
	}

	/// Captures a stack backtrace of the current thread.
	///
	/// This function will capture a stack backtrace of the current OS thread of
	/// execution, returning a `Backtrace` type which can be later used to print
	/// the entire stack trace or render it to a string.
	///
	/// This function will be a noop if the `RUST_BACKTRACE` or
	/// `RUST_LIB_BACKTRACE` backtrace variables are both not set. If either
	/// environment variable is set and enabled then this function will actually
	/// capture a backtrace. Capturing a backtrace can be both memory intensive
	/// and slow, so these environment variables allow liberally using
	/// `Backtrace::capture` and only incurring a slowdown when the environment
	/// variables are set.
	///
	/// To forcibly capture a backtrace regardless of environment variables, use
	/// the `Backtrace::force_capture` function.
	#[stable(feature = "backtrace", since = "1.65.0")]
	#[inline(never)] // want to make sure there's a frame here to remove
	pub fn capture() -> Backtrace {
	if !Backtrace::enabled() {
	return Backtrace { inner: Inner::Disabled };
	}
	Backtrace::create(Backtrace::capture as usize)
	}

	/// Forcibly captures a full backtrace, regardless of environment variable
	/// configuration.
	///
	/// This function behaves the same as `capture` except that it ignores the
	/// values of the `RUST_BACKTRACE` and `RUST_LIB_BACKTRACE` environment
	/// variables, always capturing a backtrace.
	///
	/// Note that capturing a backtrace can be an expensive operation on some
	/// platforms, so this should be used with caution in performance-sensitive
	/// parts of code.
	#[stable(feature = "backtrace", since = "1.65.0")]
	#[inline(never)] // want to make sure there's a frame here to remove
	pub fn force_capture() -> Backtrace {
	Backtrace::create(Backtrace::force_capture as usize)
	}

	/// Forcibly captures a disabled backtrace, regardless of environment
	/// variable configuration.
	#[stable(feature = "backtrace", since = "1.65.0")]
	#[rustc_const_stable(feature = "backtrace", since = "1.65.0")]
	pub const fn disabled() -> Backtrace {
	Backtrace { inner: Inner::Disabled }
	}

	// Capture a backtrace which start just before the function addressed by
	// `ip`
	fn create(ip: usize) -> Backtrace {
	let _lock = lock();
	let mut frames = Vec::new();
	let mut actual_start = None;
	set_image_base();
	unsafe {
	backtrace_rs::trace_unsynchronized(\|frame\| {
	frames.push(BacktraceFrame {
	frame: RawFrame::Actual(frame.clone()),
	symbols: Vec::new(),
	});
	if frame.symbol_address().addr() == ip && actual_start.is_none() {
	actual_start = Some(frames.len());
	}
	true
	});
	}

	// If no frames came out assume that this is an unsupported platform
	// since `backtrace` doesn't provide a way of learning this right now,
	// and this should be a good enough approximation.
	let inner = if frames.is_empty() {
	Inner::Unsupported
	} else {
	Inner::Captured(LazyLock::new(lazy_resolve(Capture {
	actual_start: actual_start.unwrap_or(0),
	frames,
	})))
	};

	Backtrace { inner }
	}

	/// Returns the status of this backtrace, indicating whether this backtrace
	/// request was unsupported, disabled, or a stack trace was actually
	/// captured.
	#[stable(feature = "backtrace", since = "1.65.0")]
	#[must_use]
	pub fn status(&self) -> BacktraceStatus {
	match self.inner {
	Inner::Unsupported => BacktraceStatus::Unsupported,
	Inner::Disabled => BacktraceStatus::Disabled,
	Inner::Captured(_) => BacktraceStatus::Captured,
	}
	}
	}

	impl<'a> Backtrace {
	/// Returns an iterator over the backtrace frames.
	#[must_use]
	#[unstable(feature = "backtrace_frames", issue = "79676")]
	pub fn frames(&'a self) -> &'a [BacktraceFrame] {
	if let Inner::Captured(c) = &self.inner { &c.frames } else { &[] }
	}
	}

	#[stable(feature = "backtrace", since = "1.65.0")]
	impl fmt::Display for Backtrace {
	fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
	let capture = match &self.inner {
	Inner::Unsupported => return fmt.write_str("unsupported backtrace"),
	Inner::Disabled => return fmt.write_str("disabled backtrace"),
	Inner::Captured(c) => &**c,
	};

	let full = fmt.alternate();
	let (frames, style) = if full {
	(&capture.frames[..], backtrace_rs::PrintFmt::Full)
	} else {
	(&capture.frames[capture.actual_start..], backtrace_rs::PrintFmt::Short)
	};

	// When printing paths we try to strip the cwd if it exists, otherwise
	// we just print the path as-is. Note that we also only do this for the
	// short format, because if it's full we presumably want to print
	// everything.
	let cwd = crate::env::current_dir();
	let mut print_path = move \|fmt: &mut fmt::Formatter<'_>, path: BytesOrWideString<'_>\| {
	output_filename(fmt, path, style, cwd.as_ref().ok())
	};

	let mut f = backtrace_rs::BacktraceFmt::new(fmt, style, &mut print_path);
	f.add_context()?;
	for frame in frames {
	if frame.symbols.is_empty() {
	f.frame().print_raw(frame.frame.ip(), None, None, None)?;
	} else {
	for symbol in frame.symbols.iter() {
	f.frame().print_raw_with_column(
	frame.frame.ip(),
	symbol.name.as_ref().map(\|b\| backtrace_rs::SymbolName::new(b)),
	symbol.filename.as_ref().map(\|b\| match b {
	BytesOrWide::Bytes(w) => BytesOrWideString::Bytes(w),
	BytesOrWide::Wide(w) => BytesOrWideString::Wide(w),
	}),
	symbol.lineno,
	symbol.colno,
	)?;
	}
	}
	}
	f.finish()?;
	Ok(())
	}
	}

	mod helper {
	use super::*;
	pub(super) type LazyResolve = impl (FnOnce() -> Capture) + Send + Sync + UnwindSafe;

	pub(super) fn lazy_resolve(mut capture: Capture) -> LazyResolve {
	move \|\| {
	// Use the global backtrace lock to synchronize this as it's a
	// requirement of the `backtrace` crate, and then actually resolve
	// everything.
	let _lock = lock();
	for frame in capture.frames.iter_mut() {
	let symbols = &mut frame.symbols;
	let frame = match &frame.frame {
	RawFrame::Actual(frame) => frame,
	#[cfg(test)]
	RawFrame::Fake => unimplemented!(),
	};
	unsafe {
	backtrace_rs::resolve_frame_unsynchronized(frame, \|symbol\| {
	symbols.push(BacktraceSymbol {
	name: symbol.name().map(\|m\| m.as_bytes().to_vec()),
	filename: symbol.filename_raw().map(\|b\| match b {
	BytesOrWideString::Bytes(b) => BytesOrWide::Bytes(b.to_owned()),
	BytesOrWideString::Wide(b) => BytesOrWide::Wide(b.to_owned()),
	}),
	lineno: symbol.lineno(),
	colno: symbol.colno(),
	});
	});
	}
	}

	capture
	}
	}
	}
	use helper::*;

	impl RawFrame {
	fn ip(&self) -> *mut c_void {
	match self {
	RawFrame::Actual(frame) => frame.ip(),
	#[cfg(test)]
	RawFrame::Fake => crate::ptr::without_provenance_mut(1),
	}
	}
	}