| |
| XZ Utils Release Notes |
| ====================== |
| |
| 5.2.5 (2020-03-17) |
| |
| * liblzma: |
| |
| - Fixed several C99/C11 conformance bugs. Now the code is clean |
| under gcc/clang -fsanitize=undefined. Some of these changes |
| might have a negative effect on performance with old GCC |
| versions or compilers other than GCC and Clang. The configure |
| option --enable-unsafe-type-punning can be used to (mostly) |
| restore the old behavior but it shouldn't normally be used. |
| |
| - Improved API documentation of lzma_properties_decode(). |
| |
| - Added a very minor encoder speed optimization. |
| |
| * xz: |
| |
| - Fixed a crash in "xz -dcfv not_an_xz_file". All four options |
| were required to trigger it. The crash occurred in the |
| progress indicator code when xz was in passthru mode where |
| xz works like "cat". |
| |
| - Fixed an integer overflow with 32-bit off_t. It could happen |
| when decompressing a file that has a long run of zero bytes |
| which xz would try to write as a sparse file. Since the build |
| system enables large file support by default, off_t is |
| normally 64-bit even on 32-bit systems. |
| |
| - Fixes for --flush-timeout: |
| * Fix semi-busy-waiting. |
| * Avoid unneeded flushes when no new input has arrived |
| since the previous flush was completed. |
| |
| - Added a special case for 32-bit xz: If --memlimit-compress is |
| used to specify a limit that exceeds 4020 MiB, the limit will |
| be set to 4020 MiB. The values "0" and "max" aren't affected |
| by this and neither is decompression. This hack can be |
| helpful when a 32-bit xz has access to 4 GiB address space |
| but the specified memlimit exceeds 4 GiB. This can happen |
| e.g. with some scripts. |
| |
| - Capsicum sandbox is now enabled by default where available |
| (FreeBSD >= 10). The sandbox debug messages (xz -vv) were |
| removed since they seemed to be more annoying than useful. |
| |
| - DOS build now requires DJGPP 2.05 instead of 2.04beta. |
| A workaround for a locale problem with DJGPP 2.05 was added. |
| |
| * xzgrep and other scripts: |
| |
| - Added a configure option --enable-path-for-scripts=PREFIX. |
| It is disabled by default except on Solaris where the default |
| is /usr/xpg4/bin. See INSTALL for details. |
| |
| - Added a workaround for a POSIX shell detection problem on |
| Solaris. |
| |
| * Build systems: |
| |
| - Added preliminary build instructions for z/OS. See INSTALL |
| section 1.2.9. |
| |
| - Experimental CMake support was added. It should work to build |
| static liblzma on a few operating systems. It may or may not |
| work to build shared liblzma. On some platforms it can build |
| xz and xzdec too but those are only for testing. See the |
| comment in the beginning of CMakeLists.txt for details. |
| |
| - Visual Studio project files were updated. |
| WindowsTargetPlatformVersion was removed from VS2017 files |
| and set to "10.0" in the added VS2019 files. In the future |
| the VS project files will be removed when CMake support is |
| good enough. |
| |
| - New #defines in config.h: HAVE___BUILTIN_ASSUME_ALIGNED, |
| HAVE___BUILTIN_BSWAPXX, and TUKLIB_USE_UNSAFE_TYPE_PUNNING. |
| |
| - autogen.sh has a new optional dependency on po4a and a new |
| option --no-po4a to skip that step. This matters only if one |
| wants to remake the build files. po4a is used to update the |
| translated man pages but as long as the man pages haven't |
| been modified, there's nothing to update and one can use |
| --no-po4a to avoid the dependency on po4a. |
| |
| * Translations: |
| |
| - XZ Utils translations are now handled by the Translation |
| Project: https://translationproject.org/domain/xz.html |
| |
| - All man pages are now included in German too. |
| |
| - New xz translations: Brazilian Portuguese, Finnish, |
| Hungarian, Chinese (simplified), Chinese (traditional), |
| and Danish (partial translation) |
| |
| - Updated xz translations: French, German, Italian, and Polish |
| |
| - Unfortunately a few new xz translations weren't included due |
| to technical problems like too long lines in --help output or |
| misaligned column headings in tables. In the future, many of |
| these strings will be split and e.g. the table column |
| alignment will be handled in software. This should make the |
| strings easier to translate. |
| |
| |
| 5.2.4 (2018-04-29) |
| |
| * liblzma: |
| |
| - Allow 0 as memory usage limit instead of returning |
| LZMA_PROG_ERROR. Now 0 is treated as if 1 byte was specified, |
| which effectively is the same as 0. |
| |
| - Use "noexcept" keyword instead of "throw()" in the public |
| headers when a C++11 (or newer standard) compiler is used. |
| |
| - Added a portability fix for recent Intel C Compilers. |
| |
| - Microsoft Visual Studio build files have been moved under |
| windows/vs2013 and windows/vs2017. |
| |
| * xz: |
| |
| - Fix "xz --list --robot missing_or_bad_file.xz" which would |
| try to print an uninitialized string and thus produce garbage |
| output. Since the exit status is non-zero, most uses of such |
| a command won't try to interpret the garbage output. |
| |
| - "xz --list foo.xz" could print "Internal error (bug)" in a |
| corner case where a specific memory usage limit had been set. |
| |
| |
| 5.2.3 (2016-12-30) |
| |
| * xz: |
| |
| - Always close a file before trying to delete it to avoid |
| problems on some operating system and file system combinations. |
| |
| - Fixed copying of file timestamps on Windows. |
| |
| - Added experimental (disabled by default) sandbox support using |
| Capsicum (FreeBSD >= 10). See --enable-sandbox in INSTALL. |
| |
| * C99/C11 conformance fixes to liblzma. The issues affected at least |
| some builds using link-time optimizations. |
| |
| * Fixed bugs in the rarely-used function lzma_index_dup(). |
| |
| * Use of external SHA-256 code is now disabled by default. |
| It can still be enabled by passing --enable-external-sha256 |
| to configure. The reasons to disable it by default (see INSTALL |
| for more details): |
| |
| - Some OS-specific SHA-256 implementations conflict with |
| OpenSSL and cause problems in programs that link against both |
| liblzma and libcrypto. At least FreeBSD 10 and MINIX 3.3.0 |
| are affected. |
| |
| - The internal SHA-256 is faster than the SHA-256 code in |
| some operating systems. |
| |
| * Changed CPU core count detection to use sched_getaffinity() on |
| GNU/Linux and GNU/kFreeBSD. |
| |
| * Fixes to the build-system and xz to make xz buildable even when |
| encoders, decoders, or threading have been disabled from libilzma |
| using configure options. These fixes added two new #defines to |
| config.h: HAVE_ENCODERS and HAVE_DECODERS. |
| |
| |
| 5.2.2 (2015-09-29) |
| |
| * Fixed bugs in QNX-specific code. |
| |
| * Omitted the use of pipe2() even if it is available to avoid |
| portability issues with some old Linux and glibc combinations. |
| |
| * Updated German translation. |
| |
| * Added project files to build static and shared liblzma (not the |
| whole XZ Utils) with Visual Studio 2013 update 2 or later. |
| |
| * Documented that threaded decompression hasn't been implemented |
| yet. A 5.2.0 NEWS entry describing multi-threading support had |
| incorrectly said "decompression" when it should have said |
| "compression". |
| |
| |
| 5.2.1 (2015-02-26) |
| |
| * Fixed a compression-ratio regression in fast mode of LZMA1 and |
| LZMA2. The bug is present in 5.1.4beta and 5.2.0 releases. |
| |
| * Fixed a portability problem in xz that affected at least OpenBSD. |
| |
| * Fixed xzdiff to be compatible with FreeBSD's mktemp which differs |
| from most other mktemp implementations. |
| |
| * Changed CPU core count detection to use cpuset_getaffinity() on |
| FreeBSD. |
| |
| |
| 5.2.0 (2014-12-21) |
| |
| Since 5.1.4beta: |
| |
| * All fixes from 5.0.8 |
| |
| * liblzma: Fixed lzma_stream_encoder_mt_memusage() when a preset |
| was used. |
| |
| * xzdiff: If mktemp isn't installed, mkdir will be used as |
| a fallback to create a temporary directory. Installing mktemp |
| is still recommended. |
| |
| * Updated French, German, Italian, Polish, and Vietnamese |
| translations. |
| |
| Summary of fixes and new features added in the 5.1.x development |
| releases: |
| |
| * liblzma: |
| |
| - Added support for multi-threaded compression. See the |
| lzma_mt structure, lzma_stream_encoder_mt(), and |
| lzma_stream_encoder_mt_memusage() in <lzma/container.h>, |
| lzma_get_progress() in <lzma/base.h>, and lzma_cputhreads() |
| in <lzma/hardware.h> for details. |
| |
| - Made the uses of lzma_allocator const correct. |
| |
| - Added lzma_block_uncomp_encode() to create uncompressed |
| .xz Blocks using LZMA2 uncompressed chunks. |
| |
| - Added support for LZMA_IGNORE_CHECK. |
| |
| - A few speed optimizations were made. |
| |
| - Added support for symbol versioning. It is enabled by default |
| on GNU/Linux, other GNU-based systems, and FreeBSD. |
| |
| - liblzma (not the whole XZ Utils) should now be buildable |
| with MSVC 2013 update 2 or later using windows/config.h. |
| |
| * xz: |
| |
| - Fixed a race condition in the signal handling. It was |
| possible that e.g. the first SIGINT didn't make xz exit |
| if reading or writing blocked and one had bad luck. The fix |
| is non-trivial, so as of writing it is unknown if it will be |
| backported to the v5.0 branch. |
| |
| - Multi-threaded compression can be enabled with the |
| --threads (-T) option. |
| [Fixed: This originally said "decompression".] |
| |
| - New command line options in xz: --single-stream, |
| --block-size=SIZE, --block-list=SIZES, |
| --flush-timeout=TIMEOUT, and --ignore-check. |
| |
| - xz -lvv now shows the minimum xz version that is required to |
| decompress the file. Currently it is 5.0.0 for all supported |
| .xz files except files with empty LZMA2 streams require 5.0.2. |
| |
| * xzdiff and xzgrep now support .lzo files if lzop is installed. |
| The .tzo suffix is also recognized as a shorthand for .tar.lzo. |
| |
| |
| 5.1.4beta (2014-09-14) |
| |
| * All fixes from 5.0.6 |
| |
| * liblzma: Fixed the use of presets in threaded encoder |
| initialization. |
| |
| * xz --block-list and --block-size can now be used together |
| in single-threaded mode. Previously the combination only |
| worked in multi-threaded mode. |
| |
| * Added support for LZMA_IGNORE_CHECK to liblzma and made it |
| available in xz as --ignore-check. |
| |
| * liblzma speed optimizations: |
| |
| - Initialization of a new LZMA1 or LZMA2 encoder has been |
| optimized. (The speed of reinitializing an already-allocated |
| encoder isn't affected.) This helps when compressing many |
| small buffers with lzma_stream_buffer_encode() and other |
| similar situations where an already-allocated encoder state |
| isn't reused. This speed-up is visible in xz too if one |
| compresses many small files one at a time instead running xz |
| once and giving all files as command-line arguments. |
| |
| - Buffer comparisons are now much faster when unaligned access |
| is allowed (configured with --enable-unaligned-access). This |
| speeds up encoding significantly. There is arch-specific code |
| for 32-bit and 64-bit x86 (32-bit needs SSE2 for the best |
| results and there's no run-time CPU detection for now). |
| For other archs there is only generic code which probably |
| isn't as optimal as arch-specific solutions could be. |
| |
| - A few speed optimizations were made to the SHA-256 code. |
| (Note that the builtin SHA-256 code isn't used on all |
| operating systems.) |
| |
| * liblzma can now be built with MSVC 2013 update 2 or later |
| using windows/config.h. |
| |
| * Vietnamese translation was added. |
| |
| |
| 5.1.3alpha (2013-10-26) |
| |
| * All fixes from 5.0.5 |
| |
| * liblzma: |
| |
| - Fixed a deadlock in the threaded encoder. |
| |
| - Made the uses of lzma_allocator const correct. |
| |
| - Added lzma_block_uncomp_encode() to create uncompressed |
| .xz Blocks using LZMA2 uncompressed chunks. |
| |
| - Added support for native threads on Windows and the ability |
| to detect the number of CPU cores. |
| |
| * xz: |
| |
| - Fixed a race condition in the signal handling. It was |
| possible that e.g. the first SIGINT didn't make xz exit |
| if reading or writing blocked and one had bad luck. The fix |
| is non-trivial, so as of writing it is unknown if it will be |
| backported to the v5.0 branch. |
| |
| - Made the progress indicator work correctly in threaded mode. |
| |
| - Threaded encoder now works together with --block-list=SIZES. |
| |
| - Added preliminary support for --flush-timeout=TIMEOUT. |
| It can be useful for (somewhat) real-time streaming. For |
| now the decompression side has to be done with something |
| else than the xz tool due to how xz does buffering, but this |
| should be fixed. |
| |
| |
| 5.1.2alpha (2012-07-04) |
| |
| * All fixes from 5.0.3 and 5.0.4 |
| |
| * liblzma: |
| |
| - Fixed a deadlock and an invalid free() in the threaded encoder. |
| |
| - Added support for symbol versioning. It is enabled by default |
| on GNU/Linux, other GNU-based systems, and FreeBSD. |
| |
| - Use SHA-256 implementation from the operating system if one is |
| available in libc, libmd, or libutil. liblzma won't use e.g. |
| OpenSSL or libgcrypt to avoid introducing new dependencies. |
| |
| - Fixed liblzma.pc for static linking. |
| |
| - Fixed a few portability bugs. |
| |
| * xz --decompress --single-stream now fixes the input position after |
| successful decompression. Now the following works: |
| |
| echo foo | xz > foo.xz |
| echo bar | xz >> foo.xz |
| ( xz -dc --single-stream ; xz -dc --single-stream ) < foo.xz |
| |
| Note that it doesn't work if the input is not seekable |
| or if there is Stream Padding between the concatenated |
| .xz Streams. |
| |
| * xz -lvv now shows the minimum xz version that is required to |
| decompress the file. Currently it is 5.0.0 for all supported .xz |
| files except files with empty LZMA2 streams require 5.0.2. |
| |
| * Added an *incomplete* implementation of --block-list=SIZES to xz. |
| It only works correctly in single-threaded mode and when |
| --block-size isn't used at the same time. --block-list allows |
| specifying the sizes of Blocks which can be useful e.g. when |
| creating files for random-access reading. |
| |
| |
| 5.1.1alpha (2011-04-12) |
| |
| * All fixes from 5.0.2 |
| |
| * liblzma fixes that will also be included in 5.0.3: |
| |
| - A memory leak was fixed. |
| |
| - lzma_stream_buffer_encode() no longer creates an empty .xz |
| Block if encoding an empty buffer. Such an empty Block with |
| LZMA2 data would trigger a bug in 5.0.1 and older (see the |
| first bullet point in 5.0.2 notes). When releasing 5.0.2, |
| I thought that no encoder creates this kind of files but |
| I was wrong. |
| |
| - Validate function arguments better in a few functions. Most |
| importantly, specifying an unsupported integrity check to |
| lzma_stream_buffer_encode() no longer creates a corrupt .xz |
| file. Probably no application tries to do that, so this |
| shouldn't be a big problem in practice. |
| |
| - Document that lzma_block_buffer_encode(), |
| lzma_easy_buffer_encode(), lzma_stream_encoder(), and |
| lzma_stream_buffer_encode() may return LZMA_UNSUPPORTED_CHECK. |
| |
| - The return values of the _memusage() functions are now |
| documented better. |
| |
| * Support for multithreaded compression was added using the simplest |
| method, which splits the input data into blocks and compresses |
| them independently. Other methods will be added in the future. |
| The current method has room for improvement, e.g. it is possible |
| to reduce the memory usage. |
| |
| * Added the options --single-stream and --block-size=SIZE to xz. |
| |
| * xzdiff and xzgrep now support .lzo files if lzop is installed. |
| The .tzo suffix is also recognized as a shorthand for .tar.lzo. |
| |
| * Support for short 8.3 filenames under DOS was added to xz. It is |
| experimental and may change before it gets into a stable release. |
| |
| |
| 5.0.8 (2014-12-21) |
| |
| * Fixed an old bug in xzgrep that affected OpenBSD and probably |
| a few other operating systems too. |
| |
| * Updated French and German translations. |
| |
| * Added support for detecting the amount of RAM on AmigaOS/AROS. |
| |
| * Minor build system updates. |
| |
| |
| 5.0.7 (2014-09-20) |
| |
| * Fix regressions introduced in 5.0.6: |
| |
| - Fix building with non-GNU make. |
| |
| - Fix invalid Libs.private value in liblzma.pc which broke |
| static linking against liblzma if the linker flags were |
| taken from pkg-config. |
| |
| |
| 5.0.6 (2014-09-14) |
| |
| * xzgrep now exits with status 0 if at least one file matched. |
| |
| * A few minor portability and build system fixes |
| |
| |
| 5.0.5 (2013-06-30) |
| |
| * lzmadec and liblzma's lzma_alone_decoder(): Support decompressing |
| .lzma files that have less common settings in the headers |
| (dictionary size other than 2^n or 2^n + 2^(n-1), or uncompressed |
| size greater than 256 GiB). The limitations existed to avoid false |
| positives when detecting .lzma files. The lc + lp <= 4 limitation |
| still remains since liblzma's LZMA decoder has that limitation. |
| |
| NOTE: xz's .lzma support or liblzma's lzma_auto_decoder() are NOT |
| affected by this change. They still consider uncommon .lzma headers |
| as not being in the .lzma format. Changing this would give way too |
| many false positives. |
| |
| * xz: |
| |
| - Interaction of preset and custom filter chain options was |
| made less illogical. This affects only certain less typical |
| uses cases so few people are expected to notice this change. |
| |
| Now when a custom filter chain option (e.g. --lzma2) is |
| specified, all preset options (-0 ... -9, -e) earlier are on |
| the command line are completely forgotten. Similarly, when |
| a preset option is specified, all custom filter chain options |
| earlier on the command line are completely forgotten. |
| |
| Example 1: "xz -9 --lzma2=preset=5 -e" is equivalent to "xz -e" |
| which is equivalent to "xz -6e". Earlier -e didn't put xz back |
| into preset mode and thus the example command was equivalent |
| to "xz --lzma2=preset=5". |
| |
| Example 2: "xz -9e --lzma2=preset=5 -7" is equivalent to |
| "xz -7". Earlier a custom filter chain option didn't make |
| xz forget the -e option so the example was equivalent to |
| "xz -7e". |
| |
| - Fixes and improvements to error handling. |
| |
| - Various fixes to the man page. |
| |
| * xzless: Fixed to work with "less" versions 448 and later. |
| |
| * xzgrep: Made -h an alias for --no-filename. |
| |
| * Include the previously missing debug/translation.bash which can |
| be useful for translators. |
| |
| * Include a build script for Mac OS X. This has been in the Git |
| repository since 2010 but due to a mistake in Makefile.am the |
| script hasn't been included in a release tarball before. |
| |
| |
| 5.0.4 (2012-06-22) |
| |
| * liblzma: |
| |
| - Fix lzma_index_init(). It could crash if memory allocation |
| failed. |
| |
| - Fix the possibility of an incorrect LZMA_BUF_ERROR when a BCJ |
| filter is used and the application only provides exactly as |
| much output space as is the uncompressed size of the file. |
| |
| - Fix a bug in doc/examples_old/xz_pipe_decompress.c. It didn't |
| check if the last call to lzma_code() really returned |
| LZMA_STREAM_END, which made the program think that truncated |
| files are valid. |
| |
| - New example programs in doc/examples (old programs are now in |
| doc/examples_old). These have more comments and more detailed |
| error handling. |
| |
| * Fix "xz -lvv foo.xz". It could crash on some corrupted files. |
| |
| * Fix output of "xz --robot -lv" and "xz --robot -lvv" which |
| incorrectly printed the filename also in the "foo (x/x)" format. |
| |
| * Fix exit status of "xzdiff foo.xz bar.xz". |
| |
| * Fix exit status of "xzgrep foo binary_file". |
| |
| * Fix portability to EBCDIC systems. |
| |
| * Fix a configure issue on AIX with the XL C compiler. See INSTALL |
| for details. |
| |
| * Update French, German, Italian, and Polish translations. |
| |
| |
| 5.0.3 (2011-05-21) |
| |
| * liblzma fixes: |
| |
| - A memory leak was fixed. |
| |
| - lzma_stream_buffer_encode() no longer creates an empty .xz |
| Block if encoding an empty buffer. Such an empty Block with |
| LZMA2 data would trigger a bug in 5.0.1 and older (see the |
| first bullet point in 5.0.2 notes). When releasing 5.0.2, |
| I thought that no encoder creates this kind of files but |
| I was wrong. |
| |
| - Validate function arguments better in a few functions. Most |
| importantly, specifying an unsupported integrity check to |
| lzma_stream_buffer_encode() no longer creates a corrupt .xz |
| file. Probably no application tries to do that, so this |
| shouldn't be a big problem in practice. |
| |
| - Document that lzma_block_buffer_encode(), |
| lzma_easy_buffer_encode(), lzma_stream_encoder(), and |
| lzma_stream_buffer_encode() may return LZMA_UNSUPPORTED_CHECK. |
| |
| - The return values of the _memusage() functions are now |
| documented better. |
| |
| * Fix command name detection in xzgrep. xzegrep and xzfgrep now |
| correctly use egrep and fgrep instead of grep. |
| |
| * French translation was added. |
| |
| |
| 5.0.2 (2011-04-01) |
| |
| * LZMA2 decompressor now correctly accepts LZMA2 streams with no |
| uncompressed data. Previously it considered them corrupt. The |
| bug can affect applications that use raw LZMA2 streams. It is |
| very unlikely to affect .xz files because no compressor creates |
| .xz files with empty LZMA2 streams. (Empty .xz files are a |
| different thing than empty LZMA2 streams.) |
| |
| * "xz --suffix=.foo filename.foo" now refuses to compress the |
| file due to it already having the suffix .foo. It was already |
| documented on the man page, but the code lacked the test. |
| |
| * "xzgrep -l foo bar.xz" works now. |
| |
| * Polish translation was added. |
| |
| |
| 5.0.1 (2011-01-29) |
| |
| * xz --force now (de)compresses files that have setuid, setgid, |
| or sticky bit set and files that have multiple hard links. |
| The man page had it documented this way already, but the code |
| had a bug. |
| |
| * gzip and bzip2 support in xzdiff was fixed. |
| |
| * Portability fixes |
| |
| * Minor fix to Czech translation |
| |
| |
| 5.0.0 (2010-10-23) |
| |
| Only the most important changes compared to 4.999.9beta are listed |
| here. One change is especially important: |
| |
| * The memory usage limit is now disabled by default. Some scripts |
| written before this change may have used --memory=max on xz command |
| line or in XZ_OPT. THESE USES OF --memory=max SHOULD BE REMOVED |
| NOW, because they interfere with user's ability to set the memory |
| usage limit himself. If user-specified limit causes problems to |
| your script, blame the user. |
| |
| Other significant changes: |
| |
| * Added support for XZ_DEFAULTS environment variable. This variable |
| allows users to set default options for xz, e.g. default memory |
| usage limit or default compression level. Scripts that use xz |
| must never set or unset XZ_DEFAULTS. Scripts should use XZ_OPT |
| instead if they need a way to pass options to xz via an |
| environment variable. |
| |
| * The compression settings associated with the preset levels |
| -0 ... -9 have been changed. --extreme was changed a little too. |
| It is now less likely to make compression worse, but with some |
| files the new --extreme may compress slightly worse than the old |
| --extreme. |
| |
| * If a preset level (-0 ... -9) is specified after a custom filter |
| chain options have been used (e.g. --lzma2), the custom filter |
| chain will be forgotten. Earlier the preset options were |
| completely ignored after custom filter chain options had been |
| seen. |
| |
| * xz will create sparse files when decompressing if the uncompressed |
| data contains long sequences of binary zeros. This is done even |
| when writing to standard output that is connected to a regular |
| file and certain additional conditions are met to make it safe. |
| |
| * Support for "xz --list" was added. Combine with --verbose or |
| --verbose --verbose (-vv) for detailed output. |
| |
| * I had hoped that liblzma API would have been stable after |
| 4.999.9beta, but there have been a couple of changes in the |
| advanced features, which don't affect most applications: |
| |
| - Index handling code was revised. If you were using the old |
| API, you will get a compiler error (so it's easy to notice). |
| |
| - A subtle but important change was made to the Block handling |
| API. lzma_block.version has to be initialized even for |
| lzma_block_header_decode(). Code that doesn't do it will work |
| for now, but might break in the future, which makes this API |
| change easy to miss. |
| |
| * The major soname has been bumped to 5.0.0. liblzma API and ABI |
| are now stable, so the need to recompile programs linking against |
| liblzma shouldn't arise soon. |
| |
