| ############################################################################# |
| # |
| # Very limited CMake support for building some parts of XZ Utils |
| # |
| # Building static liblzma with MSVC should work. Building shared liblzma.dll |
| # with MSVC may or may not work (building liblzma_w32res.rc might be broken). |
| # Building liblzma on a few other platforms should work too but it |
| # is somewhat experimental and not as portable as using ./configure. |
| # |
| # On some platforms this builds also xz and xzdec, but these are |
| # highly experimental and meant for testing only: |
| # - No large file support on those 32-bit platforms that need it |
| # - No replacement getopt_long(), libc must have it |
| # - No sandboxing support |
| # - No translations |
| # - No xz symlinks are installed |
| # |
| # Other missing things: |
| # - No xzgrep or other scripts or their symlinks |
| # - No tests (no test failures either!) |
| # |
| # NOTE: Even if the code compiles without warnings, the end result may be |
| # different than via ./configure. Specifically, the list of #defines |
| # may be different (if so, probably this CMakeLists.txt got them wrong). |
| # |
| # This file provides the following installation components (if you only |
| # need liblzma, install only its components!): |
| # - liblzma_Runtime |
| # - liblzma_Development |
| # - xz (on some platforms only) |
| # - xzdec (on some platforms only) |
| # |
| # To find the target liblzma::liblzma from other packages, use the CONFIG |
| # option with find_package() to avoid a conflict with the FindLibLZMA module |
| # with case-insensitive file systems. For example, to require liblzma 5.2.5 |
| # or a newer compatible version: |
| # |
| # find_package(liblzma 5.2.5 REQUIRED CONFIG) |
| # target_link_libraries(my_application liblzma::liblzma) |
| # |
| ############################################################################# |
| # |
| # Author: Lasse Collin |
| # |
| # This file has been put into the public domain. |
| # You can do whatever you want with this file. |
| # |
| ############################################################################# |
| |
| cmake_minimum_required(VERSION 3.13...3.16 FATAL_ERROR) |
| |
| include(CheckSymbolExists) |
| include(CheckStructHasMember) |
| include(cmake/tuklib_integer.cmake) |
| include(cmake/tuklib_cpucores.cmake) |
| include(cmake/tuklib_physmem.cmake) |
| include(cmake/tuklib_progname.cmake) |
| include(cmake/tuklib_mbstr.cmake) |
| |
| # Get the package version from version.h into XZ_VERSION variable. |
| file(READ src/liblzma/api/lzma/version.h XZ_VERSION) |
| string(REGEX REPLACE |
| "^.*\n\ |
| #define LZMA_VERSION_MAJOR ([0-9]+)\n\ |
| #define LZMA_VERSION_MINOR ([0-9]+)\n\ |
| #define LZMA_VERSION_PATCH ([0-9]+)\n\ |
| .*$" |
| "\\1.\\2.\\3" XZ_VERSION "${XZ_VERSION}") |
| |
| # Among other things, this gives us variables xz_VERSION and xz_VERSION_MAJOR. |
| project(xz VERSION "${XZ_VERSION}" LANGUAGES C) |
| |
| # Definitions common to all targets: |
| add_compile_definitions( |
| # Package info: |
| PACKAGE_NAME="XZ Utils" |
| PACKAGE_BUGREPORT="[email protected]" |
| PACKAGE_URL="https://tukaani.org/xz/" |
| |
| # Features: |
| HAVE_CHECK_CRC32 |
| HAVE_CHECK_CRC64 |
| HAVE_CHECK_SHA256 |
| HAVE_DECODERS |
| HAVE_DECODER_ARM |
| HAVE_DECODER_ARMTHUMB |
| HAVE_DECODER_DELTA |
| HAVE_DECODER_IA64 |
| HAVE_DECODER_LZMA1 |
| HAVE_DECODER_LZMA2 |
| HAVE_DECODER_POWERPC |
| HAVE_DECODER_SPARC |
| HAVE_DECODER_X86 |
| HAVE_ENCODERS |
| HAVE_ENCODER_ARM |
| HAVE_ENCODER_ARMTHUMB |
| HAVE_ENCODER_DELTA |
| HAVE_ENCODER_IA64 |
| HAVE_ENCODER_LZMA1 |
| HAVE_ENCODER_LZMA2 |
| HAVE_ENCODER_POWERPC |
| HAVE_ENCODER_SPARC |
| HAVE_ENCODER_X86 |
| HAVE_MF_BT2 |
| HAVE_MF_BT3 |
| HAVE_MF_BT4 |
| HAVE_MF_HC3 |
| HAVE_MF_HC4 |
| |
| # Standard headers and types are available: |
| HAVE_STDBOOL_H |
| HAVE__BOOL |
| HAVE_STDINT_H |
| HAVE_INTTYPES_H |
| |
| # Disable assert() checks when no build type has been specified. Non-empty |
| # build types like "Release" and "Debug" handle this by default. |
| $<$<CONFIG:>:NDEBUG> |
| ) |
| |
| # _GNU_SOURCE and such definitions. This specific macro is special since |
| # it also adds the definitions to CMAKE_REQUIRED_DEFINITIONS. |
| tuklib_use_system_extensions(ALL) |
| |
| # This is needed by liblzma and xz. |
| tuklib_integer(ALL) |
| |
| # Check for clock_gettime(). Do this before checking for threading so |
| # that we know there if CLOCK_MONOTONIC is available. |
| if(NOT WIN32 AND NOT DEFINED CACHE{HAVE_CLOCK_GETTIME}) |
| check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME) |
| if(NOT HAVE_CLOCK_GETTIME) |
| # With glibc <= 2.17 or Solaris 10 this needs librt. |
| unset(HAVE_CLOCK_GETTIME CACHE) |
| |
| list(INSERT CMAKE_REQUIRED_LIBRARIES 0 rt) |
| check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME) |
| |
| # If it was found now, add it to all targets and keep it |
| # in CMAKE_REQUIRED_LIBRARIES for further tests too. |
| if(HAVE_CLOCK_GETTIME) |
| link_libraries(rt) |
| else() |
| list(REMOVE_AT CMAKE_REQUIRED_LIBRARIES 0) |
| endif() |
| endif() |
| if(HAVE_CLOCK_GETTIME) |
| # Check if CLOCK_MONOTONIC is available for clock_gettime(). |
| check_symbol_exists(CLOCK_MONOTONIC time.h HAVE_DECL_CLOCK_MONOTONIC) |
| |
| # HAVE_DECL_CLOCK_MONOTONIC should always be defined to 0 or 1 |
| # when clock_gettime is available. |
| add_compile_definitions( |
| HAVE_CLOCK_GETTIME |
| HAVE_DECL_CLOCK_MONOTONIC=$<BOOL:"${HAVE_DECL_CLOCK_MONOTONIC}"> |
| ) |
| endif() |
| endif() |
| |
| # Threading support: |
| set(THREADS_PREFER_PTHREAD_FLAG TRUE) |
| find_package(Threads REQUIRED) |
| if(CMAKE_USE_WIN32_THREADS_INIT) |
| add_compile_definitions(MYTHREAD_VISTA) |
| else() |
| add_compile_definitions(MYTHREAD_POSIX) |
| |
| # Check if pthread_condattr_setclock() exists to use CLOCK_MONOTONIC. |
| if(HAVE_DECL_CLOCK_MONOTONIC) |
| list(INSERT CMAKE_REQUIRED_LIBRARIES 0 "${CMAKE_THREAD_LIBS_INIT}") |
| check_symbol_exists(pthread_condattr_setclock pthread.h |
| HAVE_PTHREAD_CONDATTR_SETCLOCK) |
| tuklib_add_definition_if(ALL HAVE_PTHREAD_CONDATTR_SETCLOCK) |
| endif() |
| endif() |
| |
| # Options for new enough GCC or Clang on any arch or operating system: |
| if(CMAKE_C_COMPILER_ID MATCHES GNU|Clang) |
| # configure.ac has a long list but it won't be copied here: |
| add_compile_options(-Wall -Wextra) |
| endif() |
| |
| |
| ############################################################################# |
| # liblzma |
| ############################################################################# |
| |
| option(BUILD_SHARED_LIBS "Build liblzma as a shared library instead of static") |
| |
| add_library(liblzma |
| src/common/mythread.h |
| src/common/sysdefs.h |
| src/common/tuklib_common.h |
| src/common/tuklib_config.h |
| src/common/tuklib_cpucores.c |
| src/common/tuklib_cpucores.h |
| src/common/tuklib_integer.h |
| src/common/tuklib_physmem.c |
| src/common/tuklib_physmem.h |
| src/liblzma/api/lzma.h |
| src/liblzma/api/lzma/base.h |
| src/liblzma/api/lzma/bcj.h |
| src/liblzma/api/lzma/block.h |
| src/liblzma/api/lzma/check.h |
| src/liblzma/api/lzma/container.h |
| src/liblzma/api/lzma/delta.h |
| src/liblzma/api/lzma/filter.h |
| src/liblzma/api/lzma/hardware.h |
| src/liblzma/api/lzma/index.h |
| src/liblzma/api/lzma/index_hash.h |
| src/liblzma/api/lzma/lzma12.h |
| src/liblzma/api/lzma/stream_flags.h |
| src/liblzma/api/lzma/version.h |
| src/liblzma/api/lzma/vli.h |
| src/liblzma/check/check.c |
| src/liblzma/check/check.h |
| src/liblzma/check/crc32_fast.c |
| src/liblzma/check/crc32_table.c |
| src/liblzma/check/crc32_table_be.h |
| src/liblzma/check/crc32_table_le.h |
| src/liblzma/check/crc64_fast.c |
| src/liblzma/check/crc64_table.c |
| src/liblzma/check/crc64_table_be.h |
| src/liblzma/check/crc64_table_le.h |
| src/liblzma/check/crc_macros.h |
| src/liblzma/check/sha256.c |
| src/liblzma/common/alone_decoder.c |
| src/liblzma/common/alone_decoder.h |
| src/liblzma/common/alone_encoder.c |
| src/liblzma/common/auto_decoder.c |
| src/liblzma/common/block_buffer_decoder.c |
| src/liblzma/common/block_buffer_encoder.c |
| src/liblzma/common/block_buffer_encoder.h |
| src/liblzma/common/block_decoder.c |
| src/liblzma/common/block_decoder.h |
| src/liblzma/common/block_encoder.c |
| src/liblzma/common/block_encoder.h |
| src/liblzma/common/block_header_decoder.c |
| src/liblzma/common/block_header_encoder.c |
| src/liblzma/common/block_util.c |
| src/liblzma/common/common.c |
| src/liblzma/common/common.h |
| src/liblzma/common/easy_buffer_encoder.c |
| src/liblzma/common/easy_decoder_memusage.c |
| src/liblzma/common/easy_encoder.c |
| src/liblzma/common/easy_encoder_memusage.c |
| src/liblzma/common/easy_preset.c |
| src/liblzma/common/easy_preset.h |
| src/liblzma/common/filter_buffer_decoder.c |
| src/liblzma/common/filter_buffer_encoder.c |
| src/liblzma/common/filter_common.c |
| src/liblzma/common/filter_common.h |
| src/liblzma/common/filter_decoder.c |
| src/liblzma/common/filter_decoder.h |
| src/liblzma/common/filter_encoder.c |
| src/liblzma/common/filter_encoder.h |
| src/liblzma/common/filter_flags_decoder.c |
| src/liblzma/common/filter_flags_encoder.c |
| src/liblzma/common/hardware_cputhreads.c |
| src/liblzma/common/hardware_physmem.c |
| src/liblzma/common/index.c |
| src/liblzma/common/index.h |
| src/liblzma/common/index_decoder.c |
| src/liblzma/common/index_encoder.c |
| src/liblzma/common/index_encoder.h |
| src/liblzma/common/index_hash.c |
| src/liblzma/common/memcmplen.h |
| src/liblzma/common/outqueue.c |
| src/liblzma/common/outqueue.h |
| src/liblzma/common/stream_buffer_decoder.c |
| src/liblzma/common/stream_buffer_encoder.c |
| src/liblzma/common/stream_decoder.c |
| src/liblzma/common/stream_decoder.h |
| src/liblzma/common/stream_encoder.c |
| src/liblzma/common/stream_encoder_mt.c |
| src/liblzma/common/stream_flags_common.c |
| src/liblzma/common/stream_flags_common.h |
| src/liblzma/common/stream_flags_decoder.c |
| src/liblzma/common/stream_flags_encoder.c |
| src/liblzma/common/vli_decoder.c |
| src/liblzma/common/vli_encoder.c |
| src/liblzma/common/vli_size.c |
| src/liblzma/delta/delta_common.c |
| src/liblzma/delta/delta_common.h |
| src/liblzma/delta/delta_decoder.c |
| src/liblzma/delta/delta_decoder.h |
| src/liblzma/delta/delta_encoder.c |
| src/liblzma/delta/delta_encoder.h |
| src/liblzma/delta/delta_private.h |
| src/liblzma/lz/lz_decoder.c |
| src/liblzma/lz/lz_decoder.h |
| src/liblzma/lz/lz_encoder.c |
| src/liblzma/lz/lz_encoder.h |
| src/liblzma/lz/lz_encoder_hash.h |
| src/liblzma/lz/lz_encoder_hash_table.h |
| src/liblzma/lz/lz_encoder_mf.c |
| src/liblzma/lzma/fastpos.h |
| src/liblzma/lzma/fastpos_table.c |
| src/liblzma/lzma/lzma2_decoder.c |
| src/liblzma/lzma/lzma2_decoder.h |
| src/liblzma/lzma/lzma2_encoder.c |
| src/liblzma/lzma/lzma2_encoder.h |
| src/liblzma/lzma/lzma_common.h |
| src/liblzma/lzma/lzma_decoder.c |
| src/liblzma/lzma/lzma_decoder.h |
| src/liblzma/lzma/lzma_encoder.c |
| src/liblzma/lzma/lzma_encoder.h |
| src/liblzma/lzma/lzma_encoder_optimum_fast.c |
| src/liblzma/lzma/lzma_encoder_optimum_normal.c |
| src/liblzma/lzma/lzma_encoder_presets.c |
| src/liblzma/lzma/lzma_encoder_private.h |
| src/liblzma/rangecoder/price.h |
| src/liblzma/rangecoder/price_table.c |
| src/liblzma/rangecoder/range_common.h |
| src/liblzma/rangecoder/range_decoder.h |
| src/liblzma/rangecoder/range_encoder.h |
| src/liblzma/simple/arm.c |
| src/liblzma/simple/armthumb.c |
| src/liblzma/simple/ia64.c |
| src/liblzma/simple/powerpc.c |
| src/liblzma/simple/simple_coder.c |
| src/liblzma/simple/simple_coder.h |
| src/liblzma/simple/simple_decoder.c |
| src/liblzma/simple/simple_decoder.h |
| src/liblzma/simple/simple_encoder.c |
| src/liblzma/simple/simple_encoder.h |
| src/liblzma/simple/simple_private.h |
| src/liblzma/simple/sparc.c |
| src/liblzma/simple/x86.c |
| ) |
| |
| target_include_directories(liblzma PRIVATE |
| src/liblzma/api |
| src/liblzma/common |
| src/liblzma/check |
| src/liblzma/lz |
| src/liblzma/rangecoder |
| src/liblzma/lzma |
| src/liblzma/delta |
| src/liblzma/simple |
| src/common |
| ) |
| |
| target_link_libraries(liblzma Threads::Threads) |
| |
| # Put the tuklib functions under the lzma_ namespace. |
| target_compile_definitions(liblzma PRIVATE TUKLIB_SYMBOL_PREFIX=lzma_) |
| tuklib_cpucores(liblzma) |
| tuklib_physmem(liblzma) |
| |
| # While liblzma can be built without tuklib_cpucores or tuklib_physmem |
| # modules, the liblzma API functions lzma_cputhreads() and lzma_physmem() |
| # will then be useless (which isn't too bad but still unfortunate). Since |
| # I expect the CMake-based builds to be only used on systems that are |
| # supported by these tuklib modules, problems with these tuklib modules |
| # are considered a hard error for now. This hopefully helps to catch bugs |
| # in the CMake versions of the tuklib checks. |
| if(NOT TUKLIB_CPUCORES_FOUND OR NOT TUKLIB_PHYSMEM_FOUND) |
| # Use SEND_ERROR instead of FATAL_ERROR. If someone reports a bug, |
| # seeing the results of the remaining checks can be useful too. |
| message(SEND_ERROR |
| "tuklib_cpucores() or tuklib_physmem() failed. " |
| "Unless you really are building for a system where these " |
| "modules are not supported (unlikely), this is a bug in the " |
| "included cmake/tuklib_*.cmake files that should be fixed. " |
| "To build anyway, edit this CMakeLists.txt to ignore this error.") |
| endif() |
| |
| # immintrin.h: |
| include(CheckIncludeFile) |
| check_include_file(immintrin.h HAVE_IMMINTRIN_H) |
| if(HAVE_IMMINTRIN_H) |
| target_compile_definitions(liblzma PRIVATE HAVE_IMMINTRIN_H) |
| |
| # SSE2 intrinsics: |
| include(CheckCSourceCompiles) |
| check_c_source_compiles(" |
| #include <immintrin.h> |
| int main(void) |
| { |
| __m128i x = { 0 }; |
| _mm_movemask_epi8(x); |
| return 0; |
| } |
| " |
| HAVE__MM_MOVEMASK_EPI8) |
| tuklib_add_definition_if(liblzma HAVE__MM_MOVEMASK_EPI8) |
| endif() |
| |
| # Support -fvisiblity=hidden when building shared liblzma. |
| # These lines do nothing on Windows (even under Cygwin). |
| # HAVE_VISIBILITY should always be defined to 0 or 1. |
| if(BUILD_SHARED_LIBS) |
| set_target_properties(liblzma PROPERTIES C_VISIBILITY_PRESET hidden) |
| target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=1) |
| else() |
| target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=0) |
| endif() |
| |
| if(WIN32) |
| if(BUILD_SHARED_LIBS) |
| # Add the Windows resource file for liblzma.dll. |
| target_sources(liblzma PRIVATE src/liblzma/liblzma_w32res.rc) |
| |
| # Export the public API symbols with __declspec(dllexport). |
| target_compile_definitions(liblzma PRIVATE DLL_EXPORT) |
| else() |
| # Disable __declspec(dllimport) when linking against static liblzma. |
| target_compile_definitions(liblzma INTERFACE LZMA_API_STATIC) |
| endif() |
| elseif(CMAKE_SYSTEM_NAME MATCHES "^Linux$|^FreeBSD$") |
| # Symbol versioning for shared liblzma. This doesn't affect static builds. |
| target_link_options(liblzma PRIVATE |
| "-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma.map" |
| ) |
| set_target_properties(liblzma PROPERTIES |
| LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma.map" |
| LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc" |
| ) |
| endif() |
| |
| set_target_properties(liblzma PROPERTIES |
| # At least for now the package versioning matches the rules used for |
| # shared library versioning (excluding development releases) so it is |
| # fine to use the package version here. |
| SOVERSION "${xz_VERSION_MAJOR}" |
| VERSION "${xz_VERSION}" |
| |
| # It's liblzma.so or liblzma.dll, not libliblzma.so or lzma.dll. |
| # Avoid the name lzma.dll because it would conflict with LZMA SDK. |
| PREFIX "" |
| ) |
| |
| # Create liblzmaConfigVersion.cmake. |
| # |
| # FIXME: SameMajorVersion is correct for stable releases but it is wrong |
| # for development releases where each release may have incompatible changes. |
| include(CMakePackageConfigHelpers) |
| write_basic_package_version_file( |
| "${CMAKE_CURRENT_BINARY_DIR}/liblzmaConfigVersion.cmake" |
| VERSION "${liblzma_VERSION}" |
| COMPATIBILITY SameMajorVersion) |
| |
| # Create liblzmaConfig.cmake. |
| file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/liblzmaConfig.cmake" |
| "include(CMakeFindDependencyMacro) |
| set(THREADS_PREFER_PTHREAD_FLAG TRUE) |
| find_dependency(Threads) |
| include(\"\${CMAKE_CURRENT_LIST_DIR}/liblzmaTargets.cmake\") |
| ") |
| |
| # Set CMAKE_INSTALL_LIBDIR and friends. |
| include(GNUInstallDirs) |
| |
| # Install the library binary. The INCLUDES specifies the include path that |
| # is exported for other projects to use but it doesn't install any files. |
| install(TARGETS liblzma EXPORT liblzmaTargets |
| RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}" |
| COMPONENT liblzma_Runtime |
| LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}" |
| COMPONENT liblzma_Runtime |
| NAMELINK_COMPONENT liblzma_Development |
| ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}" |
| COMPONENT liblzma_Development |
| INCLUDES DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}") |
| |
| # Install the liblzma API headers. These use a subdirectory so |
| # this has to be done as a separate step. |
| install(DIRECTORY src/liblzma/api/ |
| COMPONENT liblzma_Development |
| DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}" |
| FILES_MATCHING PATTERN "*.h") |
| |
| # Install the CMake files that other packages can use to find liblzma. |
| set(liblzma_INSTALL_CMAKEDIR |
| "${CMAKE_INSTALL_LIBDIR}/cmake/liblzma" |
| CACHE STRING "Path to liblzma's .cmake files") |
| |
| install(EXPORT liblzmaTargets |
| NAMESPACE liblzma:: |
| FILE liblzmaTargets.cmake |
| DESTINATION "${liblzma_INSTALL_CMAKEDIR}" |
| COMPONENT liblzma_Development) |
| |
| install(FILES "${CMAKE_CURRENT_BINARY_DIR}/liblzmaConfig.cmake" |
| "${CMAKE_CURRENT_BINARY_DIR}/liblzmaConfigVersion.cmake" |
| DESTINATION "${liblzma_INSTALL_CMAKEDIR}" |
| COMPONENT liblzma_Development) |
| |
| |
| ############################################################################# |
| # getopt_long |
| ############################################################################# |
| |
| # The command line tools needs this. |
| check_symbol_exists(getopt_long getopt.h HAVE_GETOPT_LONG) |
| |
| |
| ############################################################################# |
| # xzdec |
| ############################################################################# |
| |
| if(HAVE_GETOPT_LONG) |
| add_executable(xzdec |
| src/common/sysdefs.h |
| src/common/tuklib_common.h |
| src/common/tuklib_config.h |
| src/common/tuklib_exit.c |
| src/common/tuklib_exit.h |
| src/common/tuklib_gettext.h |
| src/common/tuklib_progname.c |
| src/common/tuklib_progname.h |
| src/xzdec/xzdec.c |
| ) |
| |
| target_include_directories(xzdec PRIVATE |
| src/common |
| src/liblzma/api |
| ) |
| |
| target_link_libraries(xzdec PRIVATE liblzma) |
| |
| tuklib_progname(xzdec) |
| |
| install(TARGETS xzdec |
| RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}" |
| COMPONENT xzdec) |
| |
| if(UNIX) |
| install(FILES src/xzdec/xzdec.1 |
| DESTINATION "${CMAKE_INSTALL_MANDIR}/man1" |
| COMPONENT xzdec) |
| endif() |
| endif() |
| |
| |
| ############################################################################# |
| # xz |
| ############################################################################# |
| |
| if(NOT MSVC AND HAVE_GETOPT_LONG) |
| add_executable(xz |
| src/common/mythread.h |
| src/common/sysdefs.h |
| src/common/tuklib_common.h |
| src/common/tuklib_config.h |
| src/common/tuklib_exit.c |
| src/common/tuklib_exit.h |
| src/common/tuklib_gettext.h |
| src/common/tuklib_integer.h |
| src/common/tuklib_mbstr.h |
| src/common/tuklib_mbstr_fw.c |
| src/common/tuklib_mbstr_width.c |
| src/common/tuklib_open_stdxxx.c |
| src/common/tuklib_open_stdxxx.h |
| src/common/tuklib_progname.c |
| src/common/tuklib_progname.h |
| src/xz/args.c |
| src/xz/args.h |
| src/xz/coder.c |
| src/xz/coder.h |
| src/xz/file_io.c |
| src/xz/file_io.h |
| src/xz/hardware.c |
| src/xz/hardware.h |
| src/xz/list.c |
| src/xz/list.h |
| src/xz/main.c |
| src/xz/main.h |
| src/xz/message.c |
| src/xz/message.h |
| src/xz/mytime.c |
| src/xz/mytime.h |
| src/xz/options.c |
| src/xz/options.h |
| src/xz/private.h |
| src/xz/signals.c |
| src/xz/signals.h |
| src/xz/suffix.c |
| src/xz/suffix.h |
| src/xz/util.c |
| src/xz/util.h |
| ) |
| |
| target_include_directories(xz PRIVATE |
| src/common |
| src/liblzma/api |
| ) |
| |
| target_link_libraries(xz PRIVATE liblzma) |
| |
| target_compile_definitions(xz PRIVATE ASSUME_RAM=128) |
| |
| tuklib_progname(xz) |
| tuklib_mbstr(xz) |
| |
| check_symbol_exists(optreset getopt.h HAVE_OPTRESET) |
| tuklib_add_definition_if(xz HAVE_OPTRESET) |
| |
| check_symbol_exists(posix_fadvise fcntl.h HAVE_POSIX_FADVISE) |
| tuklib_add_definition_if(xz HAVE_POSIX_FADVISE) |
| |
| # How to get file time: |
| check_struct_has_member("struct stat" st_atim.tv_nsec |
| "sys/types.h;sys/stat.h" |
| HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC) |
| if(HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC) |
| tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC) |
| else() |
| check_struct_has_member("struct stat" st_atimespec.tv_nsec |
| "sys/types.h;sys/stat.h" |
| HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC) |
| if(HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC) |
| tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC) |
| else() |
| check_struct_has_member("struct stat" st_atimensec |
| "sys/types.h;sys/stat.h" |
| HAVE_STRUCT_STAT_ST_ATIMENSEC) |
| tuklib_add_definition_if(xz HAVE_STRUCT_STAT_ST_ATIMENSEC) |
| endif() |
| endif() |
| |
| # How to set file time: |
| check_symbol_exists(futimens "sys/types.h;sys/stat.h" HAVE_FUTIMENS) |
| if(HAVE_FUTIMENS) |
| tuklib_add_definitions(xz HAVE_FUTIMENS) |
| else() |
| check_symbol_exists(futimes "sys/time.h" HAVE_FUTIMES) |
| if(HAVE_FUTIMES) |
| tuklib_add_definitions(xz HAVE_FUTIMES) |
| else() |
| check_symbol_exists(futimesat "sys/time.h" HAVE_FUTIMESAT) |
| if(HAVE_FUTIMESAT) |
| tuklib_add_definitions(xz HAVE_FUTIMESAT) |
| else() |
| check_symbol_exists(utimes "sys/time.h" HAVE_UTIMES) |
| if(HAVE_UTIMES) |
| tuklib_add_definitions(xz HAVE_UTIMES) |
| else() |
| check_symbol_exists(_futime "sys/utime.h" HAVE__FUTIME) |
| if(HAVE__FUTIME) |
| tuklib_add_definitions(xz HAVE__FUTIME) |
| else() |
| check_symbol_exists(utime "utime.h" HAVE_UTIME) |
| tuklib_add_definition_if(xz HAVE_UTIME) |
| endif() |
| endif() |
| endif() |
| endif() |
| endif() |
| |
| install(TARGETS xz |
| RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}" |
| COMPONENT xz) |
| |
| install(FILES src/xz/xz.1 |
| DESTINATION "${CMAKE_INSTALL_MANDIR}/man1" |
| COMPONENT xz) |
| endif() |